top of page

Gecko ITX-S 9 liters case

Gecko S 2.jpg
Gecko S 8.jpg

Gecko S is designed to support mid-range CPUs in the smallest size and can be cooled with air cooler or a 92mm AIO (Asetek 645 LT). The 120x15mm fan(s) can be installed to cool the RAM and VRM on the motherboard.

  • Support ASETEK 645 LT  for CPUs with TDP up to 150W such as Core i9-10900, Core i7-10700, Ryzen 7 5800x, Ryzen 7 5900x and Ryzen 9 5950x (Corsair LPX RAM should be used). Now, the Gecko S has 32mm of cable space above the fan, making it easy to organize wires.

  • Maximum CPU air cooler height = 53mm such as AMD Wraith Stealth, Cryorig C7, Noctua L9i/a. Suitable for CPU with TDP not more than 95 W such as Core i5, Ryzen 5.

  • Support SFX power supply only, e.g. Corsair SF750, Cooler Master V850 SFX, Silver Stone SX750.

Gecko S 4.jpg

Gecko S supports 2.5 slots GPU. The GPU draws cool air from the side panel. (40% openings ,no turbulence noise) and vent up the top with two 120x15mm fans, Gecko has lowest GPU temperature among ITX cases (no higher than put it outside of the case) There is a  hole cut out for the hot air coming out from the back of the GPU and added an extra lock at the bottom of the card to keep the GPU from wobbling while moving even with its heavy weight

  • Maximum GPU size = 305 L x 140 H x 52 W (2.5 Slots e.g. MSI Ventus RTX 3070, Asus TUF RTX 3090).

  • The Gecko S has an 18mm gap between the back of GPU and PSU for ventilation.

The Gecko S is designed for users to easily install their devices, in no time

  • Supports 2 2.5 "SSDs

  • Support HDD 3.5" (No GPU installed, optional bracket required)

  • Custom mechanical switch with LED light

  • Custom19-pin USB cable 

  • Custom IEC320 cable f.

  • PSU support bracket, firmly fixed, not wobbling.

Graphics 18.jpg
bottom of page