Gecko ITX-M 12-liter case
Gecko M is designed to support high end CPUs in a pocket size and can be cooled with both air cooler and widely available120mm AIO. The 120x15mm fan(s) can be installed at the bottom to blow cool air for the RAM and VRM on the motherboard.
-
Maximum radiator size is 159 L x 152W x 27 D and maximum height for the pump is 70mm, suitable for CPUs with a TDP of not more than 200W, such as Core i9-10900k, Core i7-10700k, Ryzen 7 5800x, Ryzen. 7 5900x and Ryzen 9 5950x (RAM should not be taller than 50mm) In addition, Gecko M also leaves 30mm space above the fan for cable management.
-
Maximum height for CPU cooler is 70mm, such as Noctua L12s (Corsair LPX RAM only), Scythe Big Shuriken 3 (unlimited RAM height) It is suitable for CPU with TDP not exceeding 125 W such as Core i7-10700, Ryzen 7 5800X, Ryzen 5 5600X
-
Support SFX power supply only, e.g. Corsair SF750, Cooler Master V850 SFX, Silver Stone SX750.
Gecko M supports 3 slots GPU. The GPU draws cool air from the side panel, (40% openings, no turbulence noise) and vent up the top with two 120x15mm fans, Gecko has the lowest GPU temperature among the ITX cases (no higher than put it outside of the case) We also made a hole cutout for the hot air coming out from the back of the GPU and added a extra lock at the bottom of the card to keep the GPU from wobbling while moving. even with its heavy weight
-
Maximum GPU size is 323 L x 140 H x 60 W (3 slots such as Aorus RTX 3070 Master, Asus Strix 3090).
-
The Gecko M has a 34mm gap between the back of GPU and PSU for ventilation.
The Gecko M is designed for users to easily install their equipment. In no time
-
Supports 2x 2.5 "SSDs
-
Supports 1x 3.5 "HDD (Require optional bracket)
-
The 120mm RAD can be put on top. (Require an extra bottom panel)
-
Mechanical Switch with LED light, customized cable length.
-
Customized 19-pin USB cable.
-
Customized IEC320 Power cable.
-
Extra PSU support from underside.